Merge branch 'ioana_maria.culic-main-patch-44750' into 'main'

Added reminder  LED and button wiring.

See merge request pmrust/pmrust.pages.upb.ro!67

website/lab/03/index.mdx

@@ -478,6 +478,8 @@ loop {
 
 :::info
 If you need to remember the layout of the board, check the [Lab Board](./02#the-lab-board) section from the previous lab.
+
+Remember that LEDs are wired so they light up on `Level::Low` and turn off on `Level::Low` and buttons return `Level::Low` when pressed and `Level::High` when not pressed.
 :::
 
 :::danger 
@@ -489,6 +491,8 @@ Please make sure the lab professor verifies your circuit before it is powered up
     - Make the LED change intensity from 0% to 100% in 10% increments every 1 second. (**1p**)
 :::info
 You should use the lab skeleton provided in the [Lab Repository](https://github.com/UPB-PMRust/lab-2025) as a starting point for your implementation.
+
+Embassy will reset all the peripherals when the `main` function exists, that means `PWM` and `ADC` will stop. Make sure the `main` function never exits so you can see how the circuit behaves.
 :::
 
 2. Write a program using Embassy to control the led intensity using a potentiometer. The potentiometer is connected to an ADC-capable GPIO pin. The LED should change intensity based on the potentiometer's position. (**2p**)